VISION ล้อเสือหมอบมาแล้ว
โพสต์: 17 ก.ย. 2014, 16:16
VISION ล้อเสือหมอบมาถึงแล้ว
Metron81 Tubular (WH-VT-880)
Metron is our fastest and most aerodynamic model line, for the competitor and professional who rides without compromise and demands every advantage to be on the fastest bike possible.
• Full carbon 81mm section tubular rim
• New extra light P.R.A. hubs for DP spokes
• 6 sealed ceramic cartridge bearings (2 F + 4 R) mounted on a 17mm hub axle diameter
• Aero bladed spokes
• Special ABS self locking nipples
• Artisan built, entirely by hand
• Includes special carbon QR (QR-89), brake pads, valve extenders, and wheel bags
• Rims: UD carbon finish
• Front hub: UD carbon finish
• Rear hub: black anodized
• Spokes: black
• Color graphics options: red
• Aluminum freehub body for Shimano 10-11sp
• Spokes (F/R): 18 radial front wheel; 21 rear wheel, 14 Campagnolo 10-11, 14 cross x2 drive side and 7 radial non drive side (2:1 ratio)
• Weight: 1,460g/pair (w/o QR)
ราคาตั้ง 66,000 บาท
Metron81 Clincher (WH-VT-880CH)
A deep dish carbon clincher based on the overwhelming success of the Metron 81 tubular wheelset. Metron is our fastest and most aerodynamic model line, for the competitor and professional who rides without compromise and demands every advantage to be on the fastest bike possible.
• Full carbon 81mm section clincher rim
• New extra light P.R.A. hubs for DP spokes
• 6 sealed ceramic cartridge bearings (2 F + 4 R) mounted on a 17mm hub axle diameter
• Aero bladed spokes
• Special ABS self locking nipples
• Artisan built, entirely by hand
• Includes special carbon QR (QR-89), brake pads and wheel bags
• Rims: UD carbon finish
• Front hub: UD carbon finish
• Rear hub: black anodized
• Spokes: black
• Color graphics options: red
• Sizes: Aluminum freehub body for Shimano 9-10-11sp
• Spokes (F/R): 18 radial front wheel; 21 rear wheel, 14 Campagnolo 10-11, 14 cross x2 drive side and 7 radial non drive side (2:1 ratio)
• Minimum tire requirement of 23mm
• Weight: 1,495g/pair (w/o QR)
ราคาตั้ง 68,000 บาท
Metron55 Tubular (WH-VT-855)
Vision’s ultrafast and stable aero wheel developed through extensive CFD analysis and wind tunnel testing. Top-of-the-line hubs with low drag bearings.
• Full carbon 55mm section tubular rim
• New extra light P.R.A. hubs for DP spokes
• 6 sealed ceramic cartridge bearings (2 F + 4 R) mounted on a 17mm hub axle diameter
• Aero bladed spokes
• Special ABS self locking nipples
• Artisan built, entirely by hand
• Includes special carbon QR (QR-89), brake pads, valve extenders, and wheel bags
• Rims: UD carbon finish
• Front hub: UD carbon finish
• Rear hub: Black anodized
• Spokes: Black
• Color graphics options: red, black
• Sizes: Aluminum freehub body for Shimano 9-10-11sp
• Spokes (F/R): 18 radial front wheel; 21 rear wheel, 14 Campagnolo 10-11, 14 cross x2 drive side and 7 radial non drive side (2:1 ratio)
• Minimum tire requirement of 23mm
• Weight: 1,370g/pair (w/o QR)
ราคาตั้ง 62,000 บาท
Metron55 Clincher (WH-VT-855CH)
Vision’s ultrafast and stable aero wheel for clincher developed through extensive CFD analysis and wind tunnel testing. Top-of-the-line hubs with low drag bearings.
• Full carbon 55mm section clincher rim
• New extra light P.R.A. hubs for DP spokes
• 6 sealed ceramic cartridge bearings (2 F + 4 R) mounted on a 17mm hub axle diameter
• Aero bladed spokes
• Special ABS self locking nipples
• Artisan built, entirely by hand
• Includes special carbon QR (QR-89), brake pads and wheel bags
• Rims: UD carbon finish
• Front hub: UD carbon finish
• Rear hub: black anodized
• Spokes: black
• Color graphics options: red, black
• Sizes: Aluminum freehub body for Shimano 9-10-11sp
• Spokes (F/R): 18 radial front wheel; 21 rear wheel, 14 Campagnolo 10-11, 14 cross x2 drive side and 7 radial non drive side (2:1 ratio)
• Minimum tire requirement of 23mm
• Weight: 1,400g/pair (w/o QR)
ราคาตั้ง 66,000 บาท
Metron40 Tubular (WH-VT-840)
Vision’s ultrafast and stable aero wheel developed through extensive CFD analysis and wind tunnel testing. Top-of-the-line hubs with low drag bearings.
• Full carbon 40mm section tubular rim
• New extra light P. R.A. hubs for DP spokes
• 6 sealed ceramic cartridge bearings (2 F + 4 R) mounted on a 17mm hub axle diameter
• Aero bladed spokes
• Special ABS self locking nipples
• Artisan built, entirely by hand
• Includes special carbon QR (QR-89), brake pads, valve extenders and wheel bags
• Rims: UD carbon finish
• Front hub: UD carbon finish
• Rear hub: black anodized
• Spokes: Black
• Color graphics options: red, black
• Sizes: Aluminum freehub body for Shimano 9-10-11sp
• Spokes (F/R): 18 radial front wheel; 21 rear wheel, 14 cross x2 drive side and 7 radial non drive side (2:1 ratio)
• Minimum tire requirement of 23mm
• Weight: 1,330g/pair (w/o QR)
ราคาตั้ง 61,000 บาท
Metron40 Clincher (WH-VT-840CH)
Vision’s ultrafast and stable aero wheel for clincher developed through extensive CFD analysis and wind tunnel testing. Top-of-the-line hubs with low drag bearings.
• Full carbon 40mm section clincher rim
• New extra light P. R.A. hubs for DP spokes
• 6 sealed ceramic cartridge bearings (2 F + 4 R) mounted on a 17mm hub axle diameter
• Aero bladed spokes
• Special ABS self locking nipples
• Artisan built, entirely by hand
• Includes special carbon QR (QR-89), brake pads and wheel bags
• Rims: UD carbon finish
• Front hub: UD carbon finish
• Rear hub: black anodized
• Spokes: black
• Color graphics option: red, black
• Sizes: Aluminum freehub body for Shimano 9-10-11sp
• Spokes (F/R): 18 radial front wheel; 21 rear wheel, 14 cross x2 drive side and 7 radial non drive side (2:1 ratio)
• Minimum tire requirement of 23mm
• Weight: 1,480g/pair (w/o QR)
ราคาตั้ง 64,000 บาท
Trimax42 (WH-VT-620)
For hilly or twisty courses where acceleration and low weight is more important that ultimate aerodynamic efficiency, the T42 is ready and waiting. 42mm deep carbon alloy rims cut weight, while bladed spokes keep drag to a minimum. The deeper rims allow for a lower spoke count than our shallow-section aero wheels, with the T42 having 18 radial spokes at the front and 21 (14 on the drive side, seven on the non-drive side) at the rear. Carefully hand-built for long-term durability, the T42 wheelset weighs just 1,760g.
• CSI Carbon Alloy clincher rim; 42mm height
• New extra light P.R.A. hubs for DP spokes
• 6 sealed cartridge bearings (2 F + 4 R) mounted on a 17mm hub axle diameter
• Aero blade spokes
• Special ABS self locking nipples
• Artisan built, entirely by hand
• Includes Mercury alloy QR and useful wheels protection
• Aluminum freehub body for Shimano 9-10-11sp
• Spokes (F/R): 18 radial front wheel; 21 rear wheel, 14 cross X 2 drive side and 7 radial non drive side (2:1 ratio)
• Weight: 1,760g/pair (w/o QR)
ราคาตั้ง 33,000 บาท
